Product ID:UNIVOLT INSULATING OILS ANSI/ASTM D3487 TYPE I OR II
MSDS Date:06/01/1989
FSC:6685
NIIN:00-553-8731
MSDS Number: BXCNX

Emergency Phone: 713-656-3424

Info Phone: 713-656-3424

Cage: EO384

Telephone: 713-870-6000

Cage: 25050

NO INGREDIENT FOR THIS FORMULATION_INGREDIENT

LD50 LC50 Mixture:ORAL LD50 (RATS) > 5 G/KG
Routes of Entry: Inhalation:NO Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:PROLONGED OR REPEATED SKIN CONTACT MAY
CAUSE SKIN IRRITATION. PROLONGED OR REPEATED CONTACT TENDS TO
REMOVE SKIN OILS, POSSIBLY LEADING TO IRRITATION AND DERMATITIS.
EYE CONTACT MAY CAUSE IRRITATION. ASPIRATION HAZARD.
Explanation of Carcinogenicity:THIS COMPOUND CONTAINS NO INGREDIENTS AT
CONCENTRATIONS OF 0.1% OR GREATER THAT ARE CARCINOGENS OR SUSPECT
CARCINOGENS.
Effects of Overexposure:SKIN IRRITATION, DERMATITIS, EYE IRRITATION,
CHEMICAL PNEUMONIA.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYES: FLUSH WITH WATER FOR 15 MINUTES WHILE HOLDING EYELIDS
OPEN. GET MEDICAL ATTENTION. SKIN: REMOVE CONTAMINATED CLOTHING.
WASH WITH SOAP AND WATER. IF IRRITATION PERSIST, GET MEDICAL
ATTENTION. INH ALATION: REMOVE TO FRESH AIR. RESTORE BREATHING. GET
MEDICAL ATTENTION. INGESTION: DO NOT INDUCE VOMITING. IF OCCURS,
KEEP HEAD BELOW HIPS. GET MEDICAL ATTENTION.

Flash Point Method:COC
Flash Point:293F,145C
Autoignition Temp:Autoignition Temp Text:>400F
Lower Limits:0.9 %
Upper Limits:7 %
Extinguishing Media:FOAM, WATER SPRAY (FOG), DRY CHEMICAL, CARBON
DIOXIDE AND VAPORIZING LIQUID TYPE EXTINGUISHING AGENTS.
Fire Fighting Procedures:WEAR FULL PROTECTIVE CLOTHING, INCLUDING
HELMET, SELF-CONTAINED BREATHING APPARATUS, WHEN FIGHTING A
CHEMICAL FIRE. USE WATER SPRAY TO KEEP CONTAINERS COOL.
Unusual Fire/Explosion Hazard:FIRE MAY PRODUCE HAZARDOUS AND/OR TOXIC
DECOMPOSITION PRODUCTS.

Spill Release Procedures:RECOVER FREE PRODUCT. ADD SAND, EARTH OR OTHER
SUITABLE ABSORBENT MATERIAL TO SPILL AREA. MINIMIZE SKIN CONTACT.
KEEP PRODUCT OUT OF SEWERS AND WATERCOURSES. ADVISE SUTHORITIES IF
PRODUCT HAS ENTERED SEWERS OR WATERCOURSES.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:KEEP CONTAINERS CLOSED WHEN NOT IN
USE. DO NOT STORE NEAR HEAT, SPARKS, FLAME OR STRONG OXIDANTS.
MINIMIZE BREATHING VAPOR, MIST OR FUMES.
Other Precautions:AVOID PROLONGED OR REPEATED CONTACT WITH SKIN. REMOVE
AND LAUNDER CONTAMINATED CLOTHING BEFORE RE-USE. REMOVE
CONTAMINATED SHOES AND THOROUGHLY CLEAN; DISCARD IF OIL SOAKED.

Respiratory Protection:USE SUPPLIED-AIR RESPIRATORY PROTECTION IN
CONFINED OR ENCLOSED SPACES IF NEEDED.
Ventilation:USE LOCAL EXHAUST TO CAPTURE VAPOR, MISTS OR FUMES, IF
NECESSARY. PROVIDE VENTILATION SUFFICIENT TO MAINTAIN TLVS.
Protective Gloves:CHEMICAL RESISTANT
Eye Protection:SPLASH GOGGLES OR FACE SHIELD
Other Protective Equipment:USE CHEMICAL-RESISTANT APRON OR OTHER
IMPERVIOUS CLOTHING IF NEEDED TO AVOID CONTAMINATING REGULAR
CLOTHING.
Work Hygienic Practices:WASH HANDS THOROUGHLY WITH SOAP AND WATER
BEFORE EATING, DRINKING, SMOKING OR USING TOILET FACILITIES.
Supplemental Safety and Health
NON-PCB OIL CONTAINED IN COMPOUND-PRESSURE GAGE. EMPTY CONTAINERS
RETAIN RESIDUE AND CAN BE DANGEROUS. DO NOT PRESSURIZE, CUT, WELD,
BRAZE, SOLDER, DRILL, GRIND OR EXPOSE SUCH CONTAINERS TO HEAT, FLAM
E, SPARKS, STATIC ELECTRICITY OR OTHER SOURCES OF IGNITION. THEY
MAY EXPLODE AND CAUSE INJURY OR DEATH.

HCC:N1
Boiling Pt:B.P. Text:460F,238C
Melt/Freeze Pt:M.P/F.P Text:NOT GIVEN
Vapor Pres:< 0.01
Vapor Density:NOT GIVEN
Spec Gravity:0.873
pH:7
Evaporation Rate & Reference:< 0.01 (BUTYL ACETATE=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:CLEAR WATER-WHITE LIQUID WITH FAINT PETROLEUM
HYDROCARBON ODOR
Percent Volatiles by Volume:NIL

Stability Indicator/Materials to Avoid:YES
LIQUID CHLORINE, CONCENTRATED OXYGEN, SODIUM HYPOCHLORITE OR CALCIUM
HYPOCHLORITE.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:FUMES, SMOKE, CARBON MONOXIDE, SULFUR
OXIDES, ALDEHYDES AND OTHER DECOMPOSITION PRODUCTS IN CASE OF
INCOMPLETE BURNING.

Waste Disposal Methods:PREVENT WASTE FROM CONTAMINATING SURROUNDING
ENVIRONMENT. DISCARD ANY PRODUCT, RESIDUE, DISPOSAL CONTAINER OR
LINER IN ACCORDANCE WITH ALL FEDERAL, STATE AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.